SUNKKO 738AL Spotwelding Machine review
21 Apr 2021 · 13,055 views
Featured video
29 Apr 2020 · 99,383 views
In this video I’m testing a NEMA 34 closed loop stepper motor. ► Interested in the NEMA 34 closed loop stepper motor from this video? Visit my website for project details and a link to buy it from the supplier: https://mbcreates.com/stepper Currently, I’m working on rebuilding a large CNC machine. The machine’s axes weigh up to a couple of hundred kilograms. This amount of mass requires a lot of torque to accelerate and decelerate. To make sure I had enough torque, I went for the biggest motors I could find for this project: NEMA 34 closed loop stepper motors. The NEMA 34 closed loop stepper motor in this video comes with an HBS86H stepper driver. I’m using a 48 volt DC power supply for my setup. Closed loop stepper motors have a built-in encoder that tracks the motor’s position. If there is a difference between the commanded position and the position measured by the encoder, the driver uses this feedback to correct the error. This makes closed loop stepper motors a reliable option for CNC applications, within their torque and speed limits. The initial plan was to control the NEMA 34 closed loop stepper motor using Mach3. I ordered an NVEM Mach3 motion controller, but I couldn’t get it to work. In the end, I switched to an Arduino Nano running GRBL 1.1 and Universal Gcode Sender. It’s a much cheaper alternative, and so far it’s working great. ► Want this motor for your own project? Find the supplier’s product link on my website: https://mbcreates.com/stepper
Watch & build notes14 videos
21 Apr 2021 · 13,055 views
22 Apr 2020 · 21,266 views
15 Apr 2020 · 69,305 views
4 Mar 2020 · 54,012 views
27 Apr 2019 · 104,635 views
8 Mar 2019 · 70,453 views
13 Feb 2019 · 297,846 views
27 Dec 2018 · 406,187 views
18 Sept 2018 · 23,237 views
29 Aug 2018 · 286,702 views
26 May 2018 · 18,656 views
11 Apr 2018 · 3,824 views
17 Mar 2018 · 28,251 views
7 Mar 2018 · 13,838 views